Webshop

TC-2-B1 – FFP2

An FFP2 face mask is used as a filter for air inhaled during breathing. This mask is intended as a half mask and is meant solely to protect against airborne particles.  This mask is an item of personal protective equipment (PPE) for general use in conditions where class FFP2 breathing protection is necessary. This mask is not intended as a filter for liquids, odours, gases and volatile fumes. 

  • Efficiency of filter materiel: 94% 
  • Single use 
  • Made in Holland 

Call me backAsk for a quoteManualDeclaration of conformity
Filter classification
FFP2
Marking
CE Marking : 2729
Public concerned
Healthcare professionals

Requirements

This face mask is an FFP2 face mask and is covered by personal protective equipment category III. This face mask meets the following requirements: 

  • Technical Specification: BSI’s PPE for Healthcare Professionals 2020/403 – Respiratory Protective Equipment, according to EU_2020_403 Technical Specifications for Covid-19. 
  • EN 149:2001+A1:2009 
  • PPE Regulation (EU) 2016/425. NB 2797 – BSI Group The Netherlands B.V., John M Keynesplein 9, 1066 EP Amsterdam, The Netherlands. CE 2729 

 Specifications

The TC-2-B1 mask consists of 5 layers of media, 2 elastic straps (or bands), 1 aluminum nose strip and 1 polyvinyl chloride nose gasket. 

Quantity and packaging

  • Each box contains 50 mouth caps; intended for single use.
  • The packaging contains a simple instruction on the correct and safe use of the mouth masks.
  • You will also find an extensive technical specification via the QR code on the box.