HF Hepa
Construction
The holding frames are made of either galvanized or stainless steel 304 or 316. On request, an epoxy coating can be applied to frames as well. High quality steel is used in manufacturing the frames to ensure ample rigidity. Furthermore, the construction design pays consideration to optimum frame stability and ease of installation.
Application
These holding frames are widely used in air treatment cabinets and air inlet systems for equipment such as gas turbines. The frames have standard dimensions and are a good replacement for the used holding frames removed during the renovation of air treatment cabinets.
Specifications
Application: cleanrooms, hospitals
Frame: galvanized steel or stainless steel
Filterclass according to EN779:2002: n.a.
Maximum temperature: 70°C
Maximum relative humidity: 90%
Comments: Assembly tools for filters with a depth of 292 mm are included standard. Assembly tools for filters with a depth of 60-150 mm can be delivered on request
Installation
- In the event that several frames are to be fitted next to one another, it is advisable to also fit additional reinforcing
- Once the frames are fitted, sealant should be applied around the edges to prevent any leakage
- The frames should be correctly installed; the clips should be fitted on the dirty air side.
